OCKS screws (Set of 2) - Trajectory Arms

OCKS screws by M-GUNS are optimized to provide more engagement with the gas key after staking to ensure they never come loose.
OCKS screws by M-Guns (set of 2) These Grade 8, US Made screws have been modified with extra notches along the top edge to allow material from the gas key to better engage with the head after staking. Gas key installation procedure: We recommend lightly lapping the surface of the gas key with a stone and honing oil to remove any burrs and ensure a flat gas key. Clean/degrease surfaces and apply Permatex or Loctite 620 bedding compound around the gas port on bolt carrier. Oil threads and torque to 58 in/lbs Stake gas key with a press type staking tool such as the M-Guns MOACKS. Check bore with a .080 diameter weed eater line to ensure no sealant has creeped into the gas port after installation.

TIMCO Cable Tray Bolts with Flange Nuts - Zinc

FANGOSS Single Picatinny Rails Set for Mlock, Aluminum Single Picatinny Rails with 13 T-Nuts, 13 Screws, 3 Hex Wrench : Sports & Outdoors

O.C.K.S.) NED CHRISTIANSEN OPTIMIZED CARRIER KEY SCREWS – SET OF 2 - Welcome to Rubber City Armory

Bolt Carrier Group 5.56 C158 HP/MPI - Trajectory Arms

O.C.K.S.) NED CHRISTIANSEN OPTIMIZED CARRIER KEY SCREWS – SET OF 2 - Welcome to Rubber City Armory

Shadow 2 - noob needs help picking Airsoft for training. Questions in comments. : r/airsoft

OCKS-OCKS

TIMCO Carriage Bolts Hex Nuts & Form A Washers - Dome - Exterior - Green

M.O.S. Fitment Question, should the screws cause the plate to bend like where it is circled? Is there a set of screws(aftermarket) that I can use to correct this? MOS plate 2

Stock Folding Mechanism- Standard Type

OCKS screws (Set of 2) - Trajectory Arms

O.C.K.S.) NED CHRISTIANSEN OPTIMIZED CARRIER KEY SCREWS – SET OF 2 - Welcome to Rubber City Armory

Best Long Range Rifles of 2024

OCKS screws (Set of 2) - Trajectory Arms

Different Types of Screws And Their Uses